"No beacon model loaded" error (V4 400 Hybrid)
switched to 48v with the octopus max ez and ever since i did, when the printer trys to home, it errors after the y and x home, with the error "no beacon model loaded". I used the configurator to change the mainboard. was working perfectly before i switched mainboard
9 Replies
I would start over on the beacon configuration steps and run through them all again https://github.com/HelgeKeck/RatOS/blob/documentation_v2.1/site/docs/configuration/beacon_contact.md
GitHub
RatOS/site/docs/configuration/beacon_contact.md at documentation_v2...
The preconfigured Raspberry Pi image that makes it easy to run Klipper + Moonraker + Mainsail on your printer. - HelgeKeck/RatOS
already have wont even perform the initial calibration
I would clear out any beacon config in your printer.cfg
and start over
already done, really dont want to but im considering just restarting from fresh
didn't work
you get that when you run BEACON_INITIAL_CALIBRATION ?
okay, so just ran it and it worked
but then i got the same error on the poke test
I dont know klipper that well but I am an IT guy and I dont like when strange things happen. I suspect the RatOS developers could help you out but it may be easier to just reimage the Pi.
as long as i keep my custom overrides file safe then it shouldn't be too much of a hastle
I am having some strange beacon issues I need to dig into as well as my thermal expansion is showing 0.00000 now when I know I tuned it before. I may backup my settings and join you in that journey soon