PLEASE HELP! I cant seem to flash RatOS onto my board
I cant seem to get a board completed in the RatOS configurator. I have tried three different boards and have different issues.
First I tried a manta M8P V2 but the list only has a m8p v1.1 or just m8p. I just regular m8p. I do the boot then flash to activate the flashing via DFU. The FLASH starts but about a minute after it then says waiting on DFU which never changes no mater how long I wait. Above that it says no DFU signal.
I then purchased an octopus v1.1 with cbi pi. This required an SD card to load the firmware. I did that and after I retart the board and cb1 ratoOS has a check board button. I click it but nothing happens.
I then purchased an Octopus pro H723 1.1 which when I hit compile firmware the application does nothing. I then went and chose just the octopus pro h723 and that made my firmware.bin file. Unfortunately same as the regular octopus after the reboot stage it wont check the board. Can't continue to the next step. I check the SD card and the file is now firmware.CUR so its reading.
Sorry if that is long but I want to use my nice printer but I am held up by this and frustrated.
2 Replies
Sounds like you need to make a video of what you're doing.
I purchased a manta m8p v1.1 and it flashed no issue.