RatOS2 issues with PT1000
Hi all!
newly I moved over to RatOS2. Since a couple of days now I try to solve issues with my PT1000 sensor. It is showing like 170°C at room temperature - sensor_type did not change and is still correct - but I also did try others. As I thought I maybe broke the sensor I picked a brand new PT1000 and connected it - with the same result. So at this point I thought it has to be a software / configuration issue. Now after a couple of days I went back to my old RatOS1.x SDCard - et voila - both sensors show the right temperature out of the box. I also coied over the user settings from RatOS1.x to RatOS2 which did also not solve the issue.
So my assumption is, that maybe something changed about the sensor configuration within RatOS2. As both sensors are showing like 170°C it feels like maybe something with the conversion factor could be wrong but honestly right now I have no clue.
Any ideas? & Thanks in advance!
7 Replies
upload your ratos v2 printer.cfg. You can't simply copy over the old config as it is incompatible with the new version of ratos
absent-sapphireOP•16mo ago
what do you mean by upload? posting it here?
Ah no worries i did not copy over the configuration - only this part:
[extruder]
sensor_type: PT1000
sensor_pin: e_sensor_pin
min_temp: 0
max_temp: 300
no, we need the whole thing. Order is VERY important and you need to add it in the correct spot
So click and drag the file into this screen and it will upload it
absent-sapphireOP•16mo ago
ok sure will do so, let me spin up the machine quickly
absent-sapphireOP•16mo ago
absent-sapphireOP•16mo ago
wow im so sorry, not sure what it exactly was in the end. but when booting this time i got another error. So I tested to mave back the "aliases" section to the top of the file - which fixed the new error - but also I am seeing correct temperatures right now.
SO for sure the was a configuration issue by myself.
Many thanks anyways!
Get rid of lines 295-303 - these are already defined in the board include
Get rid of lines 308-310 - these are already defined in the hotend include