Reboot does not work when Octopus Pro is Connected to the PI

Hi. Had anyone issue with RatOs2.0, if the octopus pro board is connected to my PI4B and I hit reboot from the dropdown menu, klipper is not booting. Klipperscreen remains blank.
If I turn off the main switch and turn back again it is booting.
If I remove the USB from the PI then reboot works.
Please help...on previous ratos version it was working. I have reinstalled Ratos2.0 from skratch, does not help. Running Ratos 2.0 64 bit
Thanks

blacksmithforlife•4/3/23, 8:21 PM

besides the octopus board, what else do you have plugged into the raspberry pi?

awake-maroonOP•4/3/23, 8:37 PM

I have an USB cam, ERCF and btt ebb 42 & PITFT70...but unplugged all of them...just the octopus pro is connected...reboot does not work
...from other side if I connect all and the octopus not...reboot works

blacksmithforlife•4/3/23, 9:13 PM

Is there anything in the klipper or moonraker logs?

BBubujoe Hi. Had anyone issue with RatOs2.0, if the octopus pro board is connected to my ...

Rigattoni•4/3/23, 9:33 PM

May be you are running into the same issue I did: No reboot with attached fly-sht 42USB

Rigattoni•4/3/23, 9:34 PM

Quite easy to fix with just cutting the +5V (red one) in the USB cable.

Rigattoni•4/3/23, 9:37 PM

...and I am not alone with this issue. Seems to be an issue in the Pi.