Random missing or under-extruded layers (clacking noise) as well as inconsistent extrusion issues
Why does this suddenly happen mid print? (Also the extruder starts clacking when it happens).
Printer:
V-Core 3 500.
Rapido UHF and LGX LITE.
Otherwise stock.
Also the printer has some extrusion problems (but might also be the filament).
11 Replies
The Extrusion problems
What material? What temperature?
In the first problem (they are prob connected), i.e. with the yellow filament. I'm printing with easy PLA from fiberlogy and 210 degrees.
(the black filament is also PLA, but a tough version at the same temp).
How fast are you printing? I use 210 but I only print max 180mm/s
This might be too much then?
Any settings you recommend me to lower?
Try raising the temp
Ok will do. Also the extrusion multiplier might be too high as well.
Did a calculation yersterday of the flow, and in relation to the cube (20x20x20), it needed to be of this flow.
Should I maybe go back down to 89 as it was by default?
Take a look at the Andrew Elis tuning guide
Okay 🙂
It looks very throughout