X and Y are changed
I have reinstalled RatOS for testing purposes while I rebuild the printer and now when I move the hotend a command to move X moves Y and vice versa. the printer.cfg looks normal. What can I check?
6 Replies
absent-sapphire•2y ago
Did you plug your motors into the wrong ports on the board?
Follow the directions from this image https://docs.vorondesign.com/build/startup/images/V0-motor-configuration-guide.png
So it looks like you need to physically switch the first two stepper motor cables with each other
ratty-blush•2y ago
Thank you, I was searching for something like this. What's weird is that no matter if I switch X and Y motors, the axes are swapped. That doesn't make sense for me
ratty-blush•2y ago
hm, something else seems up. I swapped both cables, changed the direction, inverted the pins, I believe I tried every combination. X and Y were still swapped, now they are stalling. I'll make new cables now
![No description](https://cdn.answeroverflow.com/1048540339721490523/image.png)
ratty-blush•2y ago
because both motors move X and Y, is there a way to determine which of the motors this refers to?
hm, whatever it was. I tested the cables again when I crimped the new ones because I realized I don't have the right plugs and now it works. I believe on cable is faulty, will order new ones to be sure