Boss lady Posts - Answer Overflow

Boss lady

•Created by Boss lady on 9/26/2024 in #firmware-and-baremetal

ESP32 Camera Module Initialization Failure in Image Recognition System for Tissue Samples

Hey guys , am working on an image recognition system that can analyze images of tissue samples, identify malignancies, and predict possible symptoms and causes. The system will utilize a camera sensor for image capture, an ESP32 for processing, and a machine learning model for image analysis. My aim is to set up the ESP32 with the camera module to capture images, How can i interface the camera module with the microcontroller to capture clear images? Am getting the error Camera initialization failed Here's my code

#include <esp_camera.h>

void setup() {
    // Camera configuration
    camera_config_t config;
    config.ledc_channel = LEDC_CHANNEL_0;
    config.ledc_timer = LEDC_TIMER_0;
    config.pin_d0 = 5;  // Adjust based on your wiring
    // Add other pin configurations
    config.pixel_format = PIXFORMAT_JPEG;
    config.frame_size = FRAMESIZE_QVGA;
    config.jpeg_quality = 10;
    
    // Initialize the camera
    esp_err_t err = esp_camera_init(&config);
    if (err != ESP_OK) {
        Serial.println("Camera initialization failed");
        return;
    }
}

void loop() {
    camera_fb_t *fb = esp_camera_fb_get();
    if (!fb) {
        Serial.println("Camera capture failed");
        return;
    }
    // Process captured image
    esp_camera_fb_return(fb);
}

#include <esp_camera.h>

void setup() {
    // Camera configuration
    camera_config_t config;
    config.ledc_channel = LEDC_CHANNEL_0;
    config.ledc_timer = LEDC_TIMER_0;
    config.pin_d0 = 5;  // Adjust based on your wiring
    // Add other pin configurations
    config.pixel_format = PIXFORMAT_JPEG;
    config.frame_size = FRAMESIZE_QVGA;
    config.jpeg_quality = 10;
    
    // Initialize the camera
    esp_err_t err = esp_camera_init(&config);
    if (err != ESP_OK) {
        Serial.println("Camera initialization failed");
        return;
    }
}

void loop() {
    camera_fb_t *fb = esp_camera_fb_get();
    if (!fb) {
        Serial.println("Camera capture failed");
        return;
    }
    // Process captured image
    esp_camera_fb_return(fb);
}

What can I do?

3 replies

Gaming

Programming