aymen ammari Posts - Answer Overflow

aymen ammari

•Created by aymen ammari on 8/26/2024 in #iot-cloud

Arduino Wifi1010 Not Showing Online in Arduino Cloud

My Arduino Wifi1010 board is connected to an Opla IOT kit, and the device won't show it's online in the Arduino Cloud devices section. I tried uploading a basic code to the Wifi1010 to connect to the internet and that worked. Can someone explain what's wrong? This is the code I'm working on


#include <WiFiNINA.h>

#include "arduino_secrets.h"

char ssid[] = SECRET_SSID;        // my network SSID (name)
char pass[] = SECRET_PASS;    // my network password (use for WPA, or use as key for WEP)
int status = WL_IDLE_STATUS;     // the Wifi radio's status

void setup() {
  //Initialize serial and wait for port to open:
  Serial.begin(9600);
  while (!Serial);

  // attempt to connect to Wifi network:
  while (status != WL_CONNECTED) {
    Serial.print("Attempting to connect to network: ");
    Serial.println(ssid);
    // Connect to WPA/WPA2 network:
    status = WiFi.begin(ssid, pass);

    // wait 10 seconds for connection:
    delay(10000);
  }

 
  Serial.println("You're connected to the network");

  Serial.println("----------------------------------------");
  printData();
  Serial.println("----------------------------------------");
}

void loop() {
  // check the network connection once every 10 seconds:
 delay(10000);
 printData();
 Serial.println("----------------------------------------");
}

void printData() {
  Serial.println("Board Information:");
  // print your board's IP address:
  IPAddress ip = WiFi.localIP();
  Serial.print("IP Address: ");
  Serial.println(ip);

  Serial.println();
  Serial.println("Network Information:");
  Serial.print("SSID: ");
  Serial.println(WiFi.SSID());

  // print the received signal strength:
  long rssi = WiFi.RSSI();
  Serial.print("signal strength (RSSI):");
  Serial.println(rssi);

}

8 replies

Gaming

Programming