MyFairJulia
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
For future reference, here are the steps users can take if the automatic headphone detection fails:
Step 1: Make sure to clean out the headphone jack because lint can short the ground to another pin and make any device think that a headphone is connected.
@CheckYourFax recommends a can of compressed air. Should that not be enough, i recommend an interdental brush as it‘s small enough to get in there and does not risk leaving lint behind unlike the trimmed cotton swab i used.
Also use isopropyl alcohol to clean tech up. NEVER EVER EVER USE WATER! We‘re here to remove a short, not to risk shorting the rest of the PC.
If that fails, your headphone jack is borked. If you do not happen to have the soldering skills and the correct headphone jack ready, you can use the following commands to disable headphone detection:
amixer -c 1 sset 'Auto-Mute Mode' Disabled
amixer -c 1 sset Speaker 100% unmute
If that fails with Unable to find simple control
then you can try amixer -c 0
.
Thank you @CheckYourFax for retrieving those commands and for your assistance.66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
INTERDENTAL BRUSH? THIS TOOL IS NOT AT THE TOP? THAT‘S THE BEST TOOL FOR THIS PURPOSE. THE HELL DID WIKIHOW SMOKE?
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
The jack doesn‘t look so different from before. But there might have been debris in there that shorted the jack out.
I followed the instructions outlined here to clean my headphone jack: https://www.wikihow.com/Clean-a-Headphone-Jack
Then i booted my Win Mini and now headphone autodetection works again. There might be a better way to clean a headphone jack and i‘m certain it didn‘t look that way when the Win Mini came. But it is a helpful first step one can take if autodetection fails.
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working

66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working

66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
IT WAS THE DEBRIS!
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working

66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
I did open my device, but this happened weeks ago and thus it would be weird if the issue started popping up now. Especially since i only removed the fan.
I did take a look into the headphone jack and it looks odd indeed. I‘m starting to suspect that something has gotten inside that shorts out the ground pin which another pin and thus makes my Win Mini believe a headphone is connected.
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
Done
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
And here's the output for the sink:
id 42, type PipeWire:Interface:Node
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.components = "HDA:10ec0245,1fdb0002,00100001"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC245 Analog"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c0000 irq 128"
alsa.mixer_name = "Realtek ALC245"
alsa.name = "ALC245 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c0000 irq 128"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.headroom = "0"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
api.alsa.period-num = "32"
api.alsa.period-size = "1024"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "3"
* client.id = "41"
clock.quantum-limit = "8192"
device.api = "alsa"
device.class = "sound"
* device.id = "74"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
* factory.id = "19"
factory.name = "api.alsa.pcm.sink"
library.name = "audioconvert/libspa-audioconvert"
* media.class = "Audio/Sink"
* node.description = "Family 17h/19h/1ah HD Audio Controller Analog Stereo"
node.driver = "true"
node.loop.name = "data-loop.0"
node.max-latency = "16384/48000"
* node.name = "alsa_output.pci-0000_63_00.6.analog-stereo"
* node.nick = "ALC245 Analog"
node.pause-on-idle = "false"
* object.path = "alsa:acp:Generic_1:3:playback"
* object.serial = "458"
port.group = "playback"
* priority.driver = "900"
* priority.session = "900"
session.suspend-timeout-seconds = "0"
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
Here's the output for
wpctl inspect
on the device:
id 74, type PipeWire:Interface:Device
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.components = "HDA:10ec0245,1fdb0002,00100001"
alsa.driver_name = "snd_hda_intel"
alsa.id = "Generic_1"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c0000 irq 128"
alsa.mixer_name = "Realtek ALC245"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c0000 irq 128"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "hw:1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
* client.id = "41"
* device.api = "alsa"
device.bus = "pci"
device.bus-path = "pci-0000:63:00.6"
* device.description = "Family 17h/19h/1ah HD Audio Controller"
device.enum.api = "udev"
device.icon-name = "audio-card-analog-pci"
* device.name = "alsa_card.pci-0000_63_00.6"
* device.nick = "HD-Audio Generic"
device.plugged.usec = "7491143"
device.product.id = "0x15e3"
device.product.name = "Family 17h/19h/1ah HD Audio Controller"
device.string = "1"
device.subsystem = "sound"
device.sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:63:00.6/sound/card1"
device.vendor.id = "0x1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
* factory.id = "15"
* media.class = "Audio/Device"
object.path = "alsa:acp:Generic_1"
* object.serial = "453"
spa.object.id = "4"66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
I‘ll do that in a few minutes
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
Would that mean that i have to switch to headphones manually or does it just not completely disable the speakers when a headphone is connected?
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
How can i disable pipewire suspend?
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
Oh i see, thanks for clarification
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
I believe that suspend is unrelated to this since audio worked mostly well ever since i installed Bazzite last year.
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working

66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
Another addendum: I plugged headphones in and rebooted my Win Mini. Also i plugged my headphones in and disconnected them. Both didn‘t change anything.
66 replies
UBUniversal Blue
•Created by MyFairJulia on 4/19/2025 in #🛟bazzite-help
GPD Win Mini internal speakers are not working
Here's also the
amixer
output:
66 replies