kikeminchas
UBUniversal Blue
•Created by kikeminchas on 8/10/2024 in #🛟bazzite-help
HHD TDP settings not respected after wake up
Just switched from Simple Decky TDP and working great mostly. Only issue I noticed is that after waking up from sleep HHD stops respecting the TDP settings I have defined (so, let's say I have defined a max TDP 9w, the handheld suddenly starts using much more). If I go to HHD TDP settings and click on Apply Settings (without changing anything) then everything goes back to normal.
Device is a GPD Win4 6800U, latest update of Bazzite
Also, is there somwhere an explanation for the advanced TDP settings (like Fast TDP limit, Slow TDP limit ...)
Thanks
29 replies
UBUniversal Blue
•Created by kikeminchas on 5/8/2024 in #🛟bazzite-help
External screen with Dell WD19S not working in Desktop Mode
As the title says, I'm trying to use a external screen via a Dell docking station (WD19S). Docking station connects to GPD WIN 4 6800U through USBC and to external screen via DisplayPort. I get a display while on Gaming Mode but as soon as I switch to Desktop mode the screen goes blank and disconnects after some seconds, no display in the Win4 either. After some seconds it tries to display someting again (I see screen is being brought back on from power save status) but stays blank and disconnects again. This behavior repeats on a loop.
Tried to use Win+P and cursor keys to see if changing the external display output would help but no result. When I disconnect the cable from the Win4 I can see that there is a notification from KDE6 requesting my admin password. Entering the password does nothing (at least nothing I can see).
Any idea how to troubleshoot this? I assume is not a compatibility issue with the dock because it's working in game mode but no idea why it doesn't in desktop mode... Thanks!
28 replies
UBUniversal Blue
•Created by kikeminchas on 4/26/2024 in #🛟bazzite-help
Bazzite 3.0 New install - GPD Win 4 6800U - Gyro not working
Hi! New user here. Just installed bazzite, almost everything working perfectly apart from external screen not working in desktop mode (not so important) and gyro not working. I have been trying to investigate this last one. Tried removing conf for HHD, rebooting, played with several options of HD to no avail. On a fresh boot, calibration values in Steam show either 0 all of them or some weird numbers, no reaction to movement. Doing a lsmod I found the bmi160 module, shouldn't I have the bmi260 instead? any idea how to troubleshoot this further?
EDIT: this is the dmesg output for the bmi modules
[ 6.300967] bmi160_i2c i2c-BMI0160:00: supply vdd not found, using dummy regulator
[ 6.313653] bmi160_i2c i2c-BMI0160:00: supply vddio not found, using dummy regulator
[ 6.315550] bmi160_i2c i2c-BMI0160:00: mounting matrix not found: using identity...
[ 6.317966] bmi160_i2c i2c-BMI0160:00: Error reading chip id
[ 6.319329] bmi160_i2c: probe of i2c-BMI0160:00 failed with error -121
69 replies