dragaoazuljr
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
yeah, it seems my motherboard only supports s2idle, which don't turn off a lot of things, that's probaly why it wont turn off the fans or leds.
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
lsblk -f to get the UUID of the partition
btrfs inspect-internal map-swapfile -r /var/swpa/swapfile (only works on btrfs file systems) to get the resume_offset
then set the kernel partition with
rpm-ostree kargs --append-if-missing="resume=UUID={UUID_partition}"
rpm-ostree kargs --append-if-missing="resume_offset={resume_offset}"
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
thanks for the support, if I may suggest, change the guide to note the size of swap, on the guide is 21gb fixed, adding a note suggesting at least double of the RAM size. And the kernel parameter, which is different from other linux distros because of rpm-ostree.
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
after setting resume and resume_offset
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
Nice, it worked
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
i have the offset, just cant set the resume_offset with the echo command, now I was going to try setting via Grub, changing the /etc/default/grub and then running "ujust -regenerate-grub"
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
bios you mean running on legacy boot?
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
I tried with 32gb, now the error is diferent, "Call to hibernate failed: Not running on EFI and resume= is not set, or noresume is set. No available method to resume from hibernation". I found a way to add the kernel parameter (https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate#Acquire_swap_file_offset) but the echo > ...resume_offset just returned with permission denied. I don't know if with the image system of bazzite you can change ther kernel params
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
i'll try
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
I tried find a config on bios, but found none
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
I could use Suspend instead of hibernate, but all the leds of the pc and fan stays on, do you know a way to turn them off on suspend?
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
maybe returing to zram and just setting the file bigger can work?
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
when going to hibertation, it showed the message "Failed to hibernate: Not enough swap space for hibernation"
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
before following the guide I was using swapfile with zram, and it was 16gb
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
16gb ram and the swapfile is 21gb
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
also returns empty
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
the zram-generator.conf file is empty, is there other any way to confirm is disabled?
62 replies
UBUniversal Blue
•Created by dragaoazuljr on 1/24/2025 in #🛟bazzite-help
Can't go to Hibernation
I tried running with sudo but still didn't work
62 replies