Lily58 Keymap Problem
I have bought and mapped the lily58 kit. The left side works fine and the right side works except for the 9 key. I am using ZMK studio to remap the keys. How do I troubleshoot this
1 Reply
It sounds like you have a single key that isn't working on your Lily58. This is usually a hardware issue.
Here's what you can check, in order of likelihood:
1. Check the switch: If you're using hotswap sockets, remove the switch and check if the pins are bent. If they are, you can gently bend them back into place with tweezers. If the pins aren't bent, try replacing the switch with one you know works.
2. Check the hotswap socket: If you're using hotswap, the contacts on the back of the socket might be bent. Remove the plate or case and try bending the gold contacts on the back of the socket so they make better contact with the switch pins. It's also possible the socket wasn't soldered properly; you can try adding a little more solder to each side.
3. Check the diode: As a last resort, check the small rectangular diode near the switch. Make sure it's oriented correctly, soldered down properly, and not cracked. You can try reheating or adding solder to each side of the diode.
You can find more detailed troubleshooting steps for a single key not working in our documentation here: https://docs.typeractive.xyz/troubleshooting/single-key-not-working
If you've tried these steps and the key still isn't working, please reply to this message or tag me for further assistance!
Single Key Not Working | Typeractive.xyz Documentation
Fix a single key not working on your keyboard.