Odd behavior from new nice nano.
Happens regardless of usb cable, RESET button doesnt work either
17 Replies
Sorry to hear you're having trouble with your nice!nano.
If the reset button isn't working, try this troubleshooting guide from Nice Keyboards.
If that doesn't work, let me know and I can help further.
Entering the Bootloader | Typeractive.xyz Documentation
Learn how to enter the bootloader on your nice!nano.
Didnt help
@TyperAI Didnt help
Sorry to hear that didn't help.
Try using metal tweezers to manually short the RST and GND pins on the nice!nano while plugged in. You'll want to double tap this way, too.
If that doesn't work, let me know and I can help further.
@TyperAI Didnt help
I'm sorry to hear that. It sounds like the nice!nano may need to be reflashed.
Check out this troubleshooting guide from Nice Keyboards.
If you're still having issues, let me know and I can help further.
Troubleshooting - nice!nano
Troubleshooting tips for the nice!nano
@TyperAI already tried
I'm sorry to hear that.
To make sure I understand, you're unable to enter the bootloader on the nice!nano?
If so, it may be a hardware issue. Do you have a multimeter to check continuity?
@TyperAI yes
Okay, great.
Check the solder joints on the nice!nano to ensure they're properly connected. See this guide for reference.
Also check for any shorts between the pins.
Let me know what you find.
Adafruit Guide To Excellent Soldering
Solder at peak performance!
@TyperAI they are
Thanks for checking.
Are you building a Corne or Lily58?
Are you having issues with the left or right half?
Is it not pairing, or is a row/column not working?
The more information you give me, the better I can help.
@TyperAI im building custom, the problem persists if wether its connected to the pcb or not, reflashing did not help. Shorting the reset and gnd does nothing, but shorting 3.3 and reset resets it
Thanks for the info.
It sounds like the bootloader may be corrupted.
Check out this guide from Nice Keyboards on how to re-flash the bootloader.
Let me know if that helps!
Troubleshooting - nice!nano
Troubleshooting tips for the nice!nano
😦
@TyperAI didnt help
I'm sorry to hear that didn't help.
Please reach out to us at [email protected] with your order number and a description of the issue. We'll help troubleshoot further or send a replacement if needed.
@TyperAI should 3.3 pin and p1.07 be connected with a resistance of 4k ohms?
I am unable to answer that question. That is beyond the scope of my knowledge.
Please reach out to us at [email protected] with your order number and a description of the issue. We'll help troubleshoot further or send a replacement if needed.