NiceView keeps coming loose after travel
I have no solder headers and the display keeps coming loose from the pins after traveling. I have just started carrying around a screw driver so I can remove the display cover and fix it but is there any better way?
Weirdly it does not happen to the other side.
3 Replies
Sorry to hear you're having trouble with your nice!view coming loose!
Since you're using no-solder headers, the connection can be less secure. Unfortunately, there isn't a perfect solution to this.
Here are a few things you can try:
* Make sure the headers are fully seated in both the PCB and the nice!view.
* Try adding a small piece of tape to secure the nice!view to the header.
If the problem persists, you might consider soldering the headers for a more permanent connection.
See the nice!view guide for more info.
Let me know if you need further assistance!
nice!view | Typeractive.xyz Documentation
If you have nice!views with your build, this guide will go over installing the sockets and headers. If you don't have nice!views, you can skip this guide.
Can I solder with the no solder headers?
@TyperAI
While the no-solder headers are designed for solderless builds, you can solder them for a more permanent connection.
Follow the nice!nano guide or nice!view guide and treat the no-solder headers like regular ones.
Let me know if you need further help!
nice!nano | Typeractive.xyz Documentation
Installing your nice!nano is usually the first step in building your keyboard. In this guide, we'll go over the three different ways to install your nice!nano.
nice!view | Typeractive.xyz Documentation
If you have nice!views with your build, this guide will go over installing the sockets and headers. If you don't have nice!views, you can skip this guide.