Corne left half dead mid-use
Hey there - have had my Corne for a while now and all of a sudden the left half died. The nice! nano is blank and it started by the top row not working for five minutes, then the bottom row, and now the whole thing won’t turn on. Is my whole board dead? Am I able to get a replacement? :/
2 Replies
That sounds frustrating! Let's try a few things:
1. Check the battery: Is it charged? The left half usually lasts about a week.
2. Power switch: Ensure it's in the "on" position.
3. Enter bootloader: Double-tap the reset button. Does the nice!nano light up? If so, try re-flashing the firmware. See our guide: https://docs.typeractive.xyz/build-guides/corne-wireless/firmware
4. Check the solder joints: Inspect the solder joints on the nice!nano, especially the power pins.
If none of these steps work, it may be a hardware issue. For further troubleshooting, see: https://docs.typeractive.xyz/troubleshooting
If you still need help, reply to this message or tag me!
Firmware | Typeractive.xyz Documentation
If you're not familiar, ZMK is a wireless-focused firmware, and it powers our Corne Wireless.
🔍 Troubleshooting | Typeractive.xyz Documentation
You can find common troubleshooting tips for your wireless keyboard here. If you can't find a solution to your problem, please reach out to us on Discord!
Can confirm all of that :/
It’s the nice! nano that fried randomly. I made an order and sent an email.