Choc right row not working
I just received my aluminum frame and key caps and switched the board over from the 3d printed case. It was cleaned with compressed air and was working until I assembled it and now it no longer works.
I don’t have any solder since I bought all the ez solder parts. I used the diagram and didn’t find any shorts with my multimeter.
I’m not sure what else to do? Just buy another pcb?
2 Replies
A non-working row is often a hardware issue, usually a soldering problem.
Check the troubleshooting guide and the pinout diagram to identify the responsible pin.
Since you have EZ-solder hotswap sockets, try reseating the header pins and the nice!nano. Even though they're solderless, sometimes the connection isn't perfect.
If the row still doesn't work, you may need to reflow the solder on the hotswap sockets.
Let me know if you need further assistance!
Row(s) or Column(s) Not Working | Typeractive.xyz Documentation
Fix row(s) or column(s) not working on your keyboard.
Troubleshooting & Pinouts | Typeractive.xyz Documentation
If you're running into issues with your keyboard, check out our Troubleshooting page for common issues and solutions. If you're still having trouble, please reach out to use on Discord!
I did reseat them and that didn’t help