VAOC no stream detected
So I am setting up a VCORE 4 IDEX 500. I set up the VAOC no stream detected. hooked up to a PC and it would detect but no display. Ordered a new 3d0 camera from frabreeko. Installed a new board and now it displays on my PC but I still get no stream detected on the printer. Does anyone have any thoughts?
Solution:Jump to solution
So this problem is 2 fold. The first VAOC cam board was bad. Mix in the fact that I forgot to put the jumper from the Raspberry pi to the hub hat and lastly the VAOC will not work unless plugged into the 3.1 port of the pi itself. It will not work on the hat usb terminals. but it will be detected.
3 Replies
Did you try to click inside where the stream should be? Had users doing it and started streaming.
Also, can you share debug.zip?
Did you try to look for the device on ssh?
ls /dev/v4l/*
This is what I got.
Solution
So this problem is 2 fold. The first VAOC cam board was bad. Mix in the fact that I forgot to put the jumper from the Raspberry pi to the hub hat and lastly the VAOC will not work unless plugged into the 3.1 port of the pi itself. It will not work on the hat usb terminals. but it will be detected.