vaoc cant finde camera
i havent used my printer for a while. vaoc worked fine a few months ago. so i did all the updates and now vaoc wont conect. i already did a ratos reinstall that didnt help. i can get a picture with mjpeg.
29 Replies
Copy the Path by ID from mainsail and paste it on device line on crowsnest.conf
For cam 1
/dev/v4l/by-id/usb-3DO_Rat_Rig_VAOC_Camera_3DO-video-index0
this one
Also, increase max fps to 30 on cam 1, decrease to 15 on cam 2 and change cam 2 to ustreamer. Easier of you don’t repeat engines
Save and restart crowsnest
didnt work
Ssh and send
ls /dev/v4l/*
Ok. The small board is detected.
Are you sure the flat cable is correctly connected to the cam?
Yep, it was working before
yes i can connect my laptop and i a picture
yes
Can you share ratos-debug.zip?
mjpegworks
whre can i find that
on configurator, left bottom
is everything up to date?
is this normal that webrtc is not noted in formats
yes. webrtc is just a low-latency service
can you change back device id to /dev/video0 and mode to ustreamer just for testing?
and do you have the vaoc cam added to mainsail?
or just config for VAOC?
i add them to see if it was working with mjpeg
is has to be camera-streamer
not sure why it is not showing. everything looks correct on config
WebRTC is a protocol, not a format.
What browser are you using?
chrome
zen and firefox
i'm not seeing any connections to camera-streamer at all in your log
this won't work reliably, firefox sucks balls unfortunately
but chrome works
Firefox basically doesn't do WebRTC over 720p
it's full of awful quirks
and 13 year old bugs 😅
And Zen is firefox, so
Open VAOC i chrome and hit ctrl + shift + r
also tried multiple pcs
didnt help
for some reason your pi isn't responding on /webcam/webrtc
(you can go to that manually btw)
if that fails your issue is on the crowsnest (possibly nginx) side
if you made any manual modifications to your software setup, that might explain it.
no everthing is stock i added daylight leds and orbitor smartsensor but i havent done the software sins i reinstalled ratos
i will reintall ratos a 3rd time tomorrow
I think this has something to do with it:
you're getting a lot of that. As well as:
I don't know why it thinks it has audio
You also seem to be running IPv6. Try and access VAOC using the IPv4 address of the pi instead of the hostname.
i always use ipv4