Wasp•3mo ago

Railway Deployment trials

Trying to deploy to Railway but it fails even after succesful build - I get this error: ERROR: failed to solve: Internal: rpc error: code = Internal desc = rpc error: code = Internal desc = header key "exclude-patterns" contains value with non-printable ASCII characters

15 Replies

kapa.ai•3mo ago

Hi @lazi. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave: ---------------------- Based on the knowledge sources provided, I don't have specific information about the error message you're encountering during Railway deployment. The documents mainly cover general steps for deploying to Railway, but they don't address this particular error. However, I can provide some general guidance based on the available information: 1. Make sure you've followed all the steps outlined in the Wasp documentation for Railway deployment. 2. Double-check that you've set up all the required environment variables correctly in the Railway dashboard, as mentioned in the deployment guide. 3. Ensure that you're using the correct versions of Node.js and other dependencies as specified in your Wasp project. 4. The error message you're seeing seems to be related to Docker and possibly non-printable ASCII characters in some configuration. You might want to review your Dockerfile and other configuration files for any unusual characters or formatting issues. If the problem persists after checking these points, you may need to reach out to Railway support or the Wasp community for more specific assistance, as the provided knowledge sources don't contain information about this particular error. ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

miho•3mo ago

Please shsre the commands you used to deploy? The more specific the better

laziOP•3mo ago

I was actually just following the tutorial here: https://wasp-lang.dev/docs/deployment/deployment-methods/paas I ended up just using the " wasp deploy fly launch my-wasp-app mia " and this worked with no errors whatsoever. What's not working though is the e-mail confirmation with Sendgrid

Platform as a Service (PaaS) | Wasp

This document explains how to build and prepare your Wasp app for deployment.

laziOP•3mo ago

@kapa.ai I changed something to my main.wasp locally. How can I re-deploy properly so nothing breaks?

kapa.ai•3mo ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- To re-deploy your Wasp app after making changes to your main.wasp file locally, you should follow these steps to ensure nothing breaks: 1. First, rebuild your Wasp app locally:

   wasp build

   wasp build

2. After rebuilding, you'll need to redeploy both the server and client components. According to the Wasp documentation on updates and redeploying, you should: - For the server:

     cd .wasp/build
     railway up

     cd .wasp/build
     railway up

- For the client:

     cd .wasp/build/web-app
     railway up

     cd .wasp/build/web-app
     railway up

3. Make sure to select the appropriate service (server or client) when prompted during the railway up command. 4. Remember that each time you run wasp build, it will remove the .wasp/build/web-app directory. So, you'll need to recreate the necessary files for the client deployment. The Wasp docs on deploying the client provide a useful shell script (deploy_client.sh) that automates this process. You can create and use this script to simplify the client deployment. 5. Don't forget to update any environment variables if your changes require it. You can do this in the Railway dashboard under the "Variables" tab for each service. By following these steps, you should be able to properly re-deploy your Wasp app after making changes to main.wasp, ensuring that nothing breaks in the process. Wasp Docs: Updates & Redeploying Wasp Docs: Deploying the Client ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

laziOP•3mo ago

@kapa.ai I went with fly.io after all. The auto deployment. I changed something to my main.wasp locally. How can I re-deploy to fly.io properly so nothing breaks?

kapa.ai•3mo ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- To re-deploy your Wasp app to Fly.io after making changes to your main.wasp file locally, you can follow these steps to ensure a smooth deployment: 1. First, make sure you have the latest version of Wasp installed. You can check your version with wasp version and upgrade if necessary. 2. Since you used the auto deployment feature, you can simply use the Wasp CLI to redeploy your app. Run the following command in your project directory:

   wasp deploy fly deploy

   wasp deploy fly deploy

This command will rebuild your app and redeploy it to Fly.io Wasp Docs: Deploying with the Wasp CLI. 3. The deployment process will take care of updating both the server and client components of your app. 4. Make sure that any new environment variables or secrets you might have added are properly set in Fly.io. You can add new secrets using the flyctl secrets set command if needed. 5. After deployment, verify that your app is working correctly by visiting the deployed URL. It's worth noting that Wasp creates two configuration files in your project root directory during the initial deployment: fly-server.toml and fly-client.toml. These files should be included in your version control, as they allow you to deploy your app with a single command in the future Wasp Docs: Deploying. By following these steps, you should be able to redeploy your Wasp app to Fly.io without breaking anything. The Wasp CLI handles most of the complexity for you, making the redeployment process straightforward. Wasp Docs: Deploying with the Wasp CLI ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

laziOP•3mo ago

Okay thankyou! @kapa.ai I need a bit of help setting up SendGrid . I've modified the defaultFrom, I've set up the SendGrid and verified account, I've set up the Fly.io respective secret but I can't get it to send me a confirmation e-mail. Failed to send email ResponseError: Forbidden 2025-02-10T13:55:16.050 app[6830dedcded1e8] mia [info] at /app/node_modules/@sendgrid/client/src/classes/client.js:146:29 2025-02-10T13:55:16.050 app[6830dedcded1e8] mia [info] at process.processTicksAndRejections (node:internal/process/task_queues:95:5) { 2025-02-10T13:55:16.050 app[6830dedcded1e8] mia [info] code: 403, 2025-02-10T13:55:16.050 app[6830dedcded1e8] mia [info] response:

kapa.ai•3mo ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- It seems you're encountering an issue with SendGrid when trying to send a confirmation email through your Wasp app deployed on Fly.io. The error message suggests a "Forbidden" response, which typically indicates an authentication or permission problem. Let's go through some steps to troubleshoot this issue: 1. API Key: Make sure you've correctly set up your SendGrid API key as a secret in Fly.io. You can do this using the following command:

   flyctl secrets set SENDGRID_API_KEY=your_api_key_here

   flyctl secrets set SENDGRID_API_KEY=your_api_key_here

Wasp Docs: Using the SendGrid Provider 2. Sender Verification: Ensure that the email address you're using in the defaultFrom field in your main.wasp file is verified in your SendGrid account. SendGrid requires sender verification to prevent spam. 3. SendGrid Account Setup: Double-check that you've completed all the necessary steps in your SendGrid account setup, including domain authentication if you're using a custom domain. 4. API Key Permissions: Verify that the API key you're using has the necessary permissions to send emails. In your SendGrid dashboard, check the API key's settings to ensure it has "Mail Send" permissions. 5. Environment Variables: Make sure the SENDGRID_API_KEY environment variable is correctly set in your .env.server file locally, and that it's been properly added to your Fly.io deployment. 6. Code Check: Review your email sending code to ensure it's correctly using the SendGrid provider and the emailSender.send() method as shown in the Wasp documentation. Wasp Docs: JavaScript API for Sending Emails 7. Redeploy: After making any changes, redeploy your app using:

   wasp deploy fly deploy

   wasp deploy fly deploy

8. Logs: If the issue persists, check your Fly.io logs for more detailed error messages:

   flyctl logs

   flyctl logs

If you've gone through these steps and are still encountering issues, you might want to try using the SMTP provider instead of the SendGrid-specific integration. Many transactional email providers, including SendGrid, support SMTP. You can find instructions for setting up the SMTP provider in the Wasp documentation on using the SMTP Provider. If none of these solutions work, you may need to contact SendGrid support for more specific troubleshooting related to your account or API key. ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

laziOP•3mo ago

@kapa.ai regardint the 2nd step with the Sender Verification: Ensure that the email address you're using in the defaultFrom field in your main.wasp file is verified in your SendGrid account. SendGrid requires sender verification to prevent spam. - What kind of e-mail should I set-up there ? Should it be the domain for the server?

kapa.ai•3mo ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- Regarding the email address you should use in the defaultFrom field in your main.wasp file, it's important to use an email address that you have verified with SendGrid. Here's what you need to know: 1. The email address should be one that you have control over and can receive emails at. It doesn't necessarily have to be the domain of your server. 2. SendGrid allows you to verify individual email addresses or entire domains. For production use, it's generally recommended to verify your domain. 3. If you're just testing or in development, you can use any email address you own and have verified with SendGrid. Here's how you would set it up in your main.wasp file:

app myApp {
  // ...
  emailSender: {
    provider: SendGrid,
    defaultFrom: {
      name: "Your App Name",
      email: "[email protected]"
    }
  }
}

app myApp {
  // ...
  emailSender: {
    provider: SendGrid,
    defaultFrom: {
      name: "Your App Name",
      email: "[email protected]"
    }
  }
}

Remember to replace "Your App Name" and "[email protected]" with your actual app name and verified email address. To verify your email address or domain with SendGrid: 1. Log into your SendGrid account 2. Go to Settings > Sender Authentication 3. Choose either "Verify a Single Sender" or "Authenticate Your Domain" 4. Follow the steps provided by SendGrid to complete the verification process Using a verified email address or domain is crucial because SendGrid requires this to prevent spam and maintain good deliverability rates for all its users. Wasp Docs: Using the SendGrid Provider If you're having trouble with the verification process or need more specific guidance, you may need to consult SendGrid's documentation or support, as the Wasp documentation doesn't cover the details of SendGrid's verification process. ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

laziOP•3mo ago

@kapa.ai Okay, let me ask something - how can I access my fly.io deployed database in an editable format ?

kapa.ai•3mo ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- To access your Fly.io deployed database in an editable format, you have a few options. Here's how you can do it: 1. Use Fly.io's proxy command to connect to your database: First, run this command in your terminal:

   fly proxy 5432 -a <your-db-name>

   fly proxy 5432 -a <your-db-name>

Replace <your-db-name> with your actual database app name on Fly.io. Github Issue: Update the database docs on seeding the production DB on Fly 2. Once you've established the proxy connection, you can use various database management tools to connect to your database. Some options include: - Prisma Studio: Run wasp db studio after setting up the proxy. This should connect you to your production database.
- External tools like DBeaver or Postico: Use the connection string provided when you run wasp start db. You'll need to adjust the host to localhost and the port to 5432 (the proxy port). Discord: Frontend React Template integration into OpenSaas template 3. If you need the database credentials: - For the database name, you can run:

     fly postgres connect -a <your-db-name>

     fly postgres connect -a <your-db-name>

Then type \l to list the databases. - For the password, you can run:

     fly ssh console -a <your-db-name>

     fly ssh console -a <your-db-name>

Then type echo $OPERATOR_PASSWORD Github Issue: Update the database docs on seeding the production DB on Fly 4. Once you have the credentials and the proxy set up, you can connect using the following connection string format:

   postgres://postgres:<password>@localhost:5432/<db_name>

   postgres://postgres:<password>@localhost:5432/<db_name>

Remember to be cautious when directly editing your production database. It's often safer to make changes through your application's API or to have a proper migration strategy in place. Also, don't forget to close the proxy and remove any temporary environment variables you might have set up for this process when you're done. Github Issue: Update the database docs on seeding the production DB on Fly ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

laziOP•3mo ago

@kapa.ai I've logged in with fly but ] Error: P1001 [ Db !] [ Db !] Can't reach database server at localhost:5432 [ Db !] [ Db !] Please make sure your database server is running at localhost:5432.

kapa.ai•3mo ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- Based on the error message you're seeing, it appears that you're having trouble connecting to your Fly.io database locally. This is a common issue when trying to access a remote database. Let's go through some steps to resolve this: 1. First, make sure you have set up the proxy connection to your Fly.io database. Run this command in your terminal:

   fly proxy 5432 -a <your-db-name>

   fly proxy 5432 -a <your-db-name>

Replace <your-db-name> with your actual database app name on Fly.io. Keep this terminal window open while you're working with the database. 2. Once the proxy is running, you need to set up your DATABASE_URL environment variable to point to the proxied database. In your .env.server file (or wherever you set your environment variables), add or modify the DATABASE_URL like this:

   DATABASE_URL=postgres://postgres:<password>@localhost:5432/<db_name>

   DATABASE_URL=postgres://postgres:<password>@localhost:5432/<db_name>

Replace <password> with your database password and <db_name> with your database name. 3. To get your database password, you can run:

   fly ssh console -a <your-db-name>

   fly ssh console -a <your-db-name>

Then type:

   echo $OPERATOR_PASSWORD

   echo $OPERATOR_PASSWORD

4. To get your database name, you can run:

   fly postgres connect -a <your-db-name>

   fly postgres connect -a <your-db-name>

Then type \l to list the databases. 5. After setting up the proxy and the correct DATABASE_URL, try running your Wasp commands again. Remember, you need to keep the proxy running in a separate terminal window while you're working with the database. If you're still encountering issues after following these steps, it might be worth checking if there's anything else running on port 5432 on your local machine that could be interfering with the connection. Github Issue: Update the database docs on seeding the production DB on Fly ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ---------------------- Sorry @lazi, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist: Perhaps try again in 15mins?

Gaming

Programming

Railway Deployment trials

Did you find this page helpful?