Second Column not working
I recently got my partially assembled corne and tested the keys after flashing. One column did not work. I attempted to reflash, reflow solder, and checked the diodes, and nothing helped. I swapped the chip to the other half and the issue persisted. I concluded that the issue is with one chip's pin, specifically P1.13. I have pictures I can provide proof of my solder work on my chip. What can I do to fix this if possible? My case was 3D printed.
2 Replies
It sounds like you've done some great troubleshooting already!
Since the issue persists even with the chip swapped, it does seem like there may be an issue with the pin itself.
Check the Corne Wireless Troubleshooting & Pinouts guide to confirm the column is connected to P1.13.
Carefully inspect the solder joint on the nice!nano and the PCB. Reflow the solder, ensuring a good connection. Also, check for any shorts.
If the issue persists, it may be a hardware problem with the nice!nano itself. You can reply or tag me for further help.
Troubleshooting & Pinouts | Typeractive.xyz Documentation
If you're running into issues with your keyboard, check out our Troubleshooting page for common issues and solutions. If you're still having trouble, please reach out to use on Discord!
