Rat Rig Community [Unofficial]•2w ago

Clicking during Y axis movement

I am guessing it is from the Hybrid motor as there is no cliking during X movement at all. Any ideas what it could be? I just rebuilt the printer from IDEX to Hybrid and the clicking started. I tried feeling around the idlers but I can't feel where the clicking would be coming from

Solution:

I believe this was solved by doign the following:

It can be fixed by loosening the belt nut on that Y motor, move the toolhead a bit by hand and tighten it again.

It can be fixed by loosening the belt nut on that Y motor, move the toolhead a bit by hand and tighten it again.

Jump to solution

3 Replies

RubbyOP•2w ago

I loosened off the Y on that side belt and turned the idlers on their own and it is certainly not the idlers so it is either the stepper or the bearing in the adapter plate? I guess replacing the bearing is the simplest option even though that's a decent amount of taking apart.

Solution

Rubby•2w ago

I believe this was solved by doign the following:

It can be fixed by loosening the belt nut on that Y motor, move the toolhead a bit by hand and tighten it again.

It can be fixed by loosening the belt nut on that Y motor, move the toolhead a bit by hand and tighten it again.

Gaming

Programming

Clicking during Y axis movement

Did you find this page helpful?