Bed Mesh on V-Core 4 500mm IDEX
Hello. I have this result, which is not flat at all, it has some dad bod and I don't know what to do.
Help please.
#fix-my-mesh
7 Replies
I´ve found that my metal bed is not 100% correct.
You could try pulling on your x-gantry. And if I see that correctly u also have to work on the squareness of your frame.
Thank you for your reply but what I tried to say with the 4 attached photos is that the metal part of the bed is bent, it is not 100% linear. Why should I modify the X-gantry when the platform itself is deformed? Everything should be level, but in my case, I received an uneven platform.
Did some one have the same issue as I do?
I have the same issue as you just not as bad. But I also don´t know how to fix it
I´ve got a new bed from RatRig team.
Here are some results:
Made few kicks on different points of frame
No bed will be 100% flat. Whatever you do or wherever you get it from. Even more on a 500.
And how do you want to measure the "platform" if it is twisted?
Check the bed with a proper straight edge if you want, not a square.
Align the frame and then check the mesh.