Can't connect to wifi after SSID/Router Upgrade - V-Core 4
We just recently switched internet providers & got a new router (Went from an Erro Pro 6 to a Pro ^E, nearly identical)
And I can not get the Pi to connect to a network. All of the mesh basestation show up individually. I have tried to connect to each one with no luck. RatOS network pops up each time.
I have disabled 5ghz mode, I have turned on "legacy mode" on the router side, and still nothing. Everything connected and worked fine before this, with the exact same Mesh extenders and same settings.
There is also a "\x20" at the end of the SSID that doesn't show on any other device.
Any help is appreciated to get the pi to connect and stay connected.
|
Solution:Jump to solution
I have solved it. Apparantly this little part
"There is also a "\x20" at the end of the SSID that doesn't show on any other device."
was the issue. Turns out the \x20 is the Pi seeing a space at the end of the name. My SSID had an extra space at the end, and the Pi hated it....
1 Reply
Solution
I have solved it. Apparantly this little part
"There is also a "\x20" at the end of the SSID that doesn't show on any other device."
was the issue. Turns out the \x20 is the Pi seeing a space at the end of the name. My SSID had an extra space at the end, and the Pi hated it.
Removed the space and it's back up and running.