Don’t connect to the webcam from IDEX

Hello I set up everything for idex and want to calibrate the head but the webcam says webcam stream not found
84 Replies
03Julian04
03Julian042d ago
@Helge Keck so here we are 😊
Helge Keck
Helge Keck2d ago
share the debug.zip file you can download it in the configurator on the left side after you shared the debug.zip file you can have a look at already existing threads that cover the same issue, your problem has most likely already be covered, mikl will take care of your thread once he has more time
03Julian04
03Julian042d ago
@Helge Keck I got now the camera working (found the description for idex) But now I have the problem that he tells me move out of range but the nozzle still isn’t over the cam do you know why
Helge Keck
Helge Keck2d ago
please share a screenshot of the error message
03Julian04
03Julian042d ago
No description
Helge Keck
Helge Keck2d ago
wow thats not a screenshot :kekw:
03Julian04
03Julian042d ago
Haha sorry don’t know that this matter
Helge Keck
Helge Keck2d ago
it does, its ok for now but for the future please provide real screenshots
03Julian04
03Julian042d ago
No description
Helge Keck
Helge Keck2d ago
so you are trying to move it in y direction, correct?
03Julian04
03Julian042d ago
Yes
Helge Keck
Helge Keck2d ago
then you need to tune your y endstop position slightly you also need to tune your x and dc endstop positinos before starting with vaoc
03Julian04
03Julian042d ago
Ah okay can I read anywhere something about this ? Or how do I have to tune them ?
Helge Keck
Helge Keck2d ago
if you cant reach the camera then you need to change the y-endstop position in your printer.cfg for the y-stepper change it by 1mm for example and then retest the max_postion, needs to have the same value
03Julian04
03Julian042d ago
Ah okay and the needed min for z I change in the z offset probe -> z_offset or ?
Helge Keck
Helge Keck2d ago
not z y, you have problems in y direction
03Julian04
03Julian042d ago
I solved this
Helge Keck
Helge Keck2d ago
dont chagen values in z-offset-probe
03Julian04
03Julian042d ago
Now I have same for z For the z offset
Helge Keck
Helge Keck2d ago
add this to your printer.cfg
position_min: -7
position_min: -7
03Julian04
03Julian042d ago
Okay 👍
03Julian04
03Julian042d ago
It’s working thanks Another question I want to start my first print but it says this
No description
03Julian04
03Julian042d ago
No description
03Julian04
03Julian042d ago
This is my start code @D00M-_ Maybe you can help too ?
Helge Keck
Helge Keck2d ago
please add WIPE_ACCEL=0 to the gocde you are using a beta version of a non supported slicer, sorry for that
03Julian04
03Julian042d ago
Same error This one in the start code ? If yes then it comes the same error
Helge Keck
Helge Keck2d ago
one sec, making a update
03Julian04
03Julian042d ago
Thank you
Helge Keck
Helge Keck2d ago
remove that again please and wait for the update
03Julian04
03Julian042d ago
Okay 👍 you mean the update from you or ?
Helge Keck
Helge Keck2d ago
yes, i already fixed it, but i need to wait for mikl to merge it so you can update it
03Julian04
03Julian042d ago
Okay 👍
Helge Keck
Helge Keck2d ago
already told him, but need to wait for his response you know, he has a life as well :kekw:
03Julian04
03Julian042d ago
Yes okay thanks Yes, unfortunately 😂
Helge Keck
Helge Keck2d ago
is this a IDEX?
03Julian04
03Julian042d ago
Yes
Helge Keck
Helge Keck2d ago
yes, this bug happens if you print with only one toolhead in the meantime print multicolor 😆
03Julian04
03Julian042d ago
😂 Also in copy Mode the same problem
Helge Keck
Helge Keck2d ago
copy mode is not multicolor
03Julian04
03Julian042d ago
Ah okay haha I thought it needs both heads for print not Absolutely multicolour
Helge Keck
Helge Keck2d ago
copy mode is two times single color
03Julian04
03Julian042d ago
Okay but the same on multicolour
03Julian04
03Julian042d ago
No description
03Julian04
03Julian042d ago
This is in multicolour
Helge Keck
Helge Keck2d ago
well, its not the same is a different error you have most likely defined the wrong klipper flavor in your slicer settings you can see how the exlude objects is throwing errors
03Julian04
03Julian042d ago
Ah okay
Helge Keck
Helge Keck2d ago
pleasae close this thread since the original issue is solved
03Julian04
03Julian042d ago
And open a new one for this ?
Helge Keck
Helge Keck2d ago
disable exlcude objects in orca slicer
03Julian04
03Julian042d ago
Do you mean in German Objekte ausschließen ? Or can you tell me where I can find this
Helge Keck
Helge Keck2d ago
yes
03Julian04
03Julian042d ago
Ah okay but I get the same error
Helge Keck
Helge Keck2d ago
then you havent it deactivated correctly if you deactivate it then this error cant be there anymore
03Julian04
03Julian042d ago
No description
Helge Keck
Helge Keck2d ago
objekte beschriften ausschalten
03Julian04
03Julian042d ago
Ah okay Same result
Helge Keck
Helge Keck2d ago
do yourself a favor and use Przusa Slicer for the IDEX you are using a not supported Slcier, its even in beta version thats not good
03Julian04
03Julian042d ago
But Prusa slicer has a feature not that I need
Helge Keck
Helge Keck2d ago
Prusa Slcier is the onyl officially supported slicer for the IDEX
03Julian04
03Julian042d ago
It is the wall direction Inner outer inner Prusa only have outer to inner but this makes some problems
Helge Keck
Helge Keck2d ago
Prusa has also Inner to outer its called print infill first or similar
03Julian04
03Julian042d ago
Yes but not inner outer and inner
Helge Keck
Helge Keck2d ago
well, it is what it is i cant change it im sorry
03Julian04
03Julian042d ago
Yes 😁 Oh men this is mad really mad
Helge Keck
Helge Keck2d ago
No description
Helge Keck
Helge Keck2d ago
here oyu have the feature External perimeters first
03Julian04
03Julian042d ago
Yes but no 😁 I need inner outer inner Not outer first At first the inner then the outer and then inner again
Helge Keck
Helge Keck2d ago
it is exactly this
No description
03Julian04
03Julian042d ago
Yes From outer to inner
03Julian04
03Julian042d ago
But I need
No description
03Julian04
03Julian042d ago
But yes like you said we can’t change it
Helge Keck
Helge Keck2d ago
ok, im sorry. but i cant change it
03Julian04
03Julian042d ago
So is there a way to use orca for me Or is this impossible
Helge Keck
Helge Keck2d ago
you can use orca with it, i already did for testing purpsies but it will never be the recommended slcier for idex i have no idea about the beta version and whats different its a bad idea to use beta slicer for the IDEX maybe its jsut your slicer config, idk
03Julian04
03Julian042d ago
Why beta ? The slicer isn’t in beta at this time
Helge Keck
Helge Keck2d ago
No description
03Julian04
03Julian042d ago
Yes I updated 5 mins ago to the official version
03Julian04
03Julian042d ago
No description
03Julian04
03Julian042d ago
😁😊
Helge Keck
Helge Keck2d ago
i have to go now ask someone in the idex channel for a 3mf file for the IDEX with orca slcier there are some poeple using it this way you can get the corret config for it
03Julian04
03Julian042d ago
Okay 👍
boroner
boroner13h ago
how do I set the position of the limit switch “y”? following the process when I bring it to the edge of the building platform it touches me at the rear with the motor bracket and at the front with the limit sensor
boroner
boroner13h ago
No description
Want results from more Discord servers?
Add your server