Lily 58 Pro RGUI not working
Currently the RGUI key is not working. Have replaced the switch with a known working switch, put extra solder on the diode and switch. Diode is on the correct direction, diode plastic doesn't seem cracked
4 Replies
If your RGUI key is still not working after replacing the switch and checking the diode, there are a few additional troubleshooting steps you can take:
1. Check the Hotswap Socket: Since you're using a hotswap keyboard, the contacts on the back of the hotswap socket may not be making proper contact with the switch. Try bending the gold contacts slightly to ensure they make contact with the switch pins.
2. Inspect the Solder Joint: Double-check the solder joint for the hotswap socket. If it wasn't soldered down properly, it could lead to connectivity issues. Adding a bit more solder to each side of the socket may help.
3. Verify the Connection: Ensure that the pin corresponding to the RGUI key on the nice!nano is properly soldered and not shorted to any adjacent pins. You can use a multimeter in continuity mode to check for shorts between pins.
4. Check the Keymap: If everything seems fine hardware-wise, ensure that the keymap is correctly configured to recognize the RGUI key. You can refer to your keymap file to confirm that the key is mapped correctly.
If you've gone through these steps and the key is still not functioning, it may be worth checking the troubleshooting section for rows and columns not working, as it often relates to soldering issues. If you need further assistance, please refer to the troubleshooting documentation for more detailed guidance.
Have not tried the recommended bending on the gold.contacts on back of switch unsure how ?
So do I just bend the switches legs or the contacts above and below (the switch legs) that is attached to the hotswap socket
Seems using tweezers to trigger a press doesn't work for that key
When tested between hotswap socket
And right hotswap pad to bottom of diode
Also tested same thing for shorts (although the short testing should be taken lightly not a electronic guy haha)
AHHHHHH works now seems the RGUI wasn't working on Ubuntu works on windows