Cant find app and blog in my folder but it says wasp already installed.
Hi everyone, ive installed Wasp but i cant find where the app and blog folder is at.
It keeps says No file or directory and even when i opened the place where i created my folder, its empty. Theres no Wasp files or whatsover in it, where could it have been? But it says wasp already installed. Im so confused
48 Replies
Hi @priv._1511. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave:
----------------------
When you create a new Wasp project using the command
wasp new MyApp, it should create a new directory named MyApp in your current working directory. This directory should contain all the necessary files and folders for your Wasp project.
Here is the typical file structure of a Wasp project:
(Source: Wasp Docs - Project Structure (https://wasp-lang.dev/docs/tutorial/project-structure))
If you can't find these files, it's possible that the project was not created successfully. You might want to try creating a new project again with the wasp new MyApp command. Make sure you're in the directory where you want the project to be created before running the command.
If you're still having trouble, it could be an issue with your installation. You can check your installation by running the wasp command in your terminal. If Wasp is installed correctly, it should show you a list of available commands and their descriptions. If not, you might need to reinstall Wasp.
Also, ensure that the directory where Wasp is installed is included in your system's PATH environment variable. If it's not, you might encounter errors when trying to run Wasp commands. You can add the directory to your PATH by following the instructions provided in this Discord support thread (https://discord.com/channels/686873244791210014/1214888257595121684).
If you're still having issues, don't hesitate to ask for more help!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai i found the place where they saved all the wasp files but it seems like i cant find it in file explorer. I only found in the terminal.
Let me check the knowledge base for you. One moment! :books:
----------------------
It's possible that the directory is hidden or not easily accessible through your file explorer. This can sometimes happen with certain system or application files. However, if you can access the directory through your terminal, you should be able to navigate to it in your file explorer as well.
Here's what you can try:
1. Open your terminal and navigate to the directory containing your Wasp files.
2. Once you're in the directory, type
pwd and press enter. This command will print the full path of the current directory.
3. Copy the output of the pwd command.
4. Open your file explorer and paste the copied path into the address bar, then press enter.
This should take you to the directory containing your Wasp files in your file explorer.
If you're still having trouble finding the directory, it might be a system-specific issue. In that case, you might want to look for solutions specific to your operating system.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai i did but it ended up redirected to me to google and ended up searched the path that ive pasted
Let me check the knowledge base for you. One moment! :books:
----------------------
It seems like you might have pasted the path into a web browser's address bar instead of the file explorer's address bar.
Here's what you should do:
1. Open your File Explorer. This is usually done by clicking on a folder icon on your taskbar or desktop, or by pressing
Win + E on your keyboard if you're using Windows.
2. Once your File Explorer is open, you should see an address bar at the top. It might currently be showing a path to a directory, or it might be showing the name of the directory you're currently in.
3. Click on the address bar. This should highlight the current path.
4. Now, paste the path you copied from the terminal into the address bar, replacing whatever was there before.
5. Press Enter on your keyboard.
This should navigate you to the directory containing your Wasp files in your File Explorer.
If you're still having trouble, please let me know what operating system you're using, and I'll try to provide more specific instructions.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai i didnt get the file structure as mentioned,why should i do? ive created the TodoApp, and then did until a new tab opened in my browser at http://localhost:3000 and how do i get the file structure like the main.wasp and everything, cant find it.
Let me check the knowledge base for you. One moment! :books:
----------------------
When you create a new Wasp project using the
wasp new TodoApp command, it should create a new directory named TodoApp in your current working directory. This directory should contain all the necessary files and folders for your Wasp project.
Here is the typical file structure of a Wasp project:
(Source: Wasp Docs - Project Structure (https://wasp-lang.dev/docs/tutorial/project-structure))
If you can't find these files, it's possible that the project was not created successfully. You might want to try creating a new project again with the wasp new TodoApp command. Make sure you're in the directory where you want the project to be created before running the command.
If you're still having trouble, it could be an issue with your installation. You can check your installation by running the wasp command in your terminal. If Wasp is installed correctly, it should show you a list of available commands and their descriptions. If not, you might need to reinstall Wasp.
Also, ensure that the directory where Wasp is installed is included in your system's PATH environment variable. If it's not, you might encounter errors when trying to run Wasp commands. You can add the directory to your PATH by following the instructions provided in this Discord support thread (https://discord.com/channels/686873244791210014/1214888257595121684).
If you're still having issues, don't hesitate to ask for more help!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai how to find the directory?
@kapa.ai how to find the directory
Wohooo @priv._1511, you just became a Waspeteer level 1!
Let me check the knowledge base for you. One moment! :books:
----------------------
To find the directory of your Wasp project, you can use the terminal (also known as the command line). Here's how you can do it:
1. Open your terminal.
2. Use the
cd command to navigate to the directory where you created your Wasp project. For example, if you created your project in a directory named projects in your home directory, you would type cd ~/projects.
3. Once you're in the correct directory, you can list the contents of the directory with the ls command. You should see a directory named TodoApp (or whatever you named your project).
4. You can navigate into your project directory with cd TodoApp.
Now you're in the directory of your Wasp project. You can confirm this by typing pwd in the terminal, which will print the full path of the current directory.
If you're still having trouble finding the directory, it might be a system-specific issue. In that case, you might want to look for solutions specific to your operating system.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai after i type wasp start, theres an error that says [nodemon] app crashed - waiting for file
Let me check the knowledge base for you. One moment! :books:
----------------------
The error message you're seeing,
[nodemon] app crashed - waiting for file changes before starting..., typically indicates that there's an issue with your application code that's causing the Node.js server to crash. Nodemon is a utility that's used to automatically restart your Node.js server when file changes are detected, so this message is telling you that it's waiting for you to make a change to your files before it tries to start the server again.
Unfortunately, without more information about the specific error that's causing the crash, it's difficult to provide a more specific solution. However, there are a few things you can try:
1. Look for any error messages above the [nodemon] app crashed - waiting for file changes before starting... message in your terminal output. These messages might give you more information about what's causing the crash.
2. Make sure all your project's dependencies are installed correctly. You can do this by running npm install in your project directory.
3. Ensure that your .env file is set up correctly, and that all required environment variables are defined. If your application is trying to use an environment variable that hasn't been defined, this could cause a crash.
4. If you're still having trouble, you might want to try creating a new Wasp project with wasp new MyApp and see if you encounter the same error. If the new project works correctly, this could indicate that there's an issue with your existing project's code or configuration.
If none of these suggestions help, please provide more information about the error you're encountering, and I'll do my best to assist you further.
In a Github Issue (https://github.com/wasp-lang/wasp/issues/62) related to a similar problem, it was suggested that the error message might not be forwarded correctly, making it hard to understand the actual problem. The issue was related to the server crashing due to missing node_modules. If you see a similar error message, try running npm start from .wasp/out/server to see the error.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai heres the code, please tell me what to do,
Let me check the knowledge base for you. One moment! :books:
----------------------
I'm sorry, but it seems like you didn't include any code in your message. Could you please provide the code you're having trouble with? That way, I can give you more specific advice on what to do.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?
@kapa.ai
Let me check the knowledge base for you. One moment! :books:
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?
@kapa.ai above the [nodemon] - app crashed warning, it says port 3001 is already in use
Let me check the knowledge base for you. One moment! :books:
----------------------
The error message "port 3001 is already in use" means that another process on your computer is already using port 3001, which is the default port that Wasp uses for the backend server during development.
Here are a few things you can try to resolve this issue:
1. Find and stop the process that's using port 3001. The method for doing this depends on your operating system. On Unix-based systems like Linux or macOS, you can use the
lsof command to find the process that's using a specific port. For example, lsof -i :3001 will show you the process using port 3001. Once you've found the process, you can stop it with the kill command. On Windows, you can use the netstat command to find the process, and then stop it via the Task Manager.
2. Change the port that your Wasp project uses. According to a Github Issue (https://github.com/wasp-lang/wasp/issues/730), you can manually specify different ports for the frontend and backend servers by setting environment variables in the .env.client and .env.server files in your Wasp project directory. For example, to use port 4040 for the backend server and port 8000 for the frontend server, you would add the following lines to your .env.client file:
And the following lines to your .env.server file:
After making these changes, you should be able to start your Wasp project with wasp start without encountering the "port 3001 is already in use" error.
Please note that the Wasp team is working on a more flexible solution for handling port allocation, as discussed in the Github Issue (https://github.com/wasp-lang/wasp/issues/730).
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai why when i edit the welcome at mainpage.jsx, it doesnt change? its still same
Let me check the knowledge base for you. One moment! :books:
----------------------
When you make changes to your
MainPage.jsx file, the changes should be reflected in your application when you save the file. Wasp uses hot module replacement, which means it should automatically update the running application in your browser when you save changes to your files.
Here's a few things you can try if your changes aren't showing up:
1. Make sure your Wasp server is running. You should have a terminal open running the wasp start command. If not, open a terminal, navigate to your project directory, and run wasp start.
2. Refresh your browser. Sometimes, a simple browser refresh can help. Make sure you're viewing your application at <http://localhost:3000> (or whatever port you've configured).
3. Check for errors. Look at the terminal where your Wasp server is running. Are there any error messages? If so, these might give you a clue as to what's going wrong.
4. Check your file save settings. Some text editors or IDEs have an option to disable automatic saving of files. Make sure this option is not enabled.
If you're still having trouble, please provide more information about your setup (e.g., what text editor or IDE you're using, what operating system you're on, etc.) and I'll do my best to assist you further.
In the Wasp tutorial (https://wasp-lang.dev/docs/tutorial/pages#cleaning-up), it's mentioned that wasp start automatically picks up the changes you make and restarts the app, so keep it running in the background. If you've stopped it, your changes won't be reflected.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?how to check file save setting on Visual studio @kapa.ai
Let me check the knowledge base for you. One moment! :books:
----------------------
In Visual Studio Code, you can check and modify your file save settings by following these steps:
1. Open Visual Studio Code.
2. Click on the gear icon in the lower left corner to open the settings menu.
3. Click on "Settings".
4. In the search bar at the top of the settings tab, type "Auto Save".
5. Look for the "Files: Auto Save" setting. This controls when Visual Studio Code will automatically save your files.
The "Files: Auto Save" setting has several options:
-
off: Files will only be saved when you manually save them (e.g., by pressing Ctrl+S or Cmd+S).
- afterDelay: Files will be saved a certain number of milliseconds after you stop typing. You can set the delay with the "Files: Auto Save Delay" setting.
- onFocusChange: Files will be saved when the Visual Studio Code window loses focus.
- onWindowChange: Files will be saved when the Visual Studio Code window is closed.
If you're having trouble getting your changes to show up in your Wasp application, you might want to set "Files: Auto Save" to afterDelay or onFocusChange. This will ensure that your files are saved automatically when you stop typing or switch away from Visual Studio Code.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?which option should i go for if i want the changes instantly @kapa.ai
which option should i go for if i want the changes instantly @kapa.ai
Let me check the knowledge base for you. One moment! :books:
----------------------
If you want your changes to be saved instantly in Visual Studio Code, you should choose the
afterDelay option in the "Files: Auto Save" setting. Then, set the "Files: Auto Save Delay" to a low value, like 1000 (for 1 second). This means that your files will be automatically saved 1 second after you stop typing.
Here's how to do it:
1. Open Visual Studio Code.
2. Click on the gear icon in the lower left corner to open the settings menu.
3. Click on "Settings".
4. In the search bar at the top of the settings tab, type "Auto Save".
5. Look for the "Files: Auto Save" setting and set it to afterDelay.
6. In the "Files: Auto Save Delay" setting, enter 1000.
Now, your files should be automatically saved 1 second after you stop typing, which should allow your changes to show up almost instantly in your Wasp application when you're running it with wasp start.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai still it doesnt change
Let me check the knowledge base for you. One moment! :books:
Wohooo @priv._1511, you just became a Waspeteer level 2!
----------------------
If your changes in
MainPage.jsx are still not reflecting in your Wasp application even after ensuring that your files are being saved instantly, there might be a few other things going on:
1. Hot Module Replacement (HMR) Issue: Wasp uses Vite for handling the frontend, which includes a feature called Hot Module Replacement (HMR). This feature should automatically update your running application in the browser when you save changes to your files. However, some users have reported issues with HMR not working as expected, causing the application to not update until a full page reload or a restart of the wasp start command. This issue was discussed in a Discord support thread (https://discord.com/channels/686873244791210014/1223304305206099969).
2. WSL2 Issue: If you're using Windows Subsystem for Linux (WSL2), there's a known issue where file changes are not detected if your project is located on the Windows filesystem instead of the Linux filesystem. This would prevent HMR from working, as it relies on detecting file changes. This issue was discussed in a Github Issue (https://github.com/wasp-lang/wasp/issues/603).
3. Application Error: If there's an error in your application code that's preventing the page from rendering, this could also cause your changes to not appear. Check the console in your browser's developer tools for any error messages.
If none of these seem to be the issue, it might be helpful to stop the wasp start command (you can do this by pressing Ctrl+C in the terminal where it's running), and then start it again. Sometimes, a fresh start can help resolve issues.
If you're still having trouble, please provide more information about your setup (e.g., any error messages you're seeing, what operating system you're using, etc.), and I'll do my best to assist you further.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai it works but i need to restart everytime, sounds hard
Let me check the knowledge base for you. One moment! :books:
----------------------
I understand that having to restart the server every time you make a change can be inconvenient. Ideally, Wasp's hot module replacement (HMR) feature should automatically update your running application in the browser when you save changes to your files, without needing to restart the server.
However, as mentioned in a Discord support thread (https://discord.com/channels/686873244791210014/1223304305206099969), some users have reported issues with HMR not working as expected. The Wasp team is aware of these issues and is working on improvements.
In the meantime, here are a few workarounds you might try:
1. Manual Browser Refresh: After saving your changes, manually refresh your browser. This can sometimes force the application to update.
2. Adjust HMR Settings: If you're comfortable with it, you might try adjusting the HMR settings in your project's Vite configuration. However, this is a more advanced option and might not be suitable for all users.
3. Use a Different Text Editor or IDE: Some users have reported that switching to a different text editor or integrated development environment (IDE) resolved their issues with HMR. If you're currently using Visual Studio Code, you might try using a different editor like Sublime Text or Atom to see if you have better results.
Remember, the need to restart the server after every change is not the intended behavior, and improvements are being worked on. Your patience and understanding are appreciated!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?
how to adjust the hmr thing? @kapa.ai
Let me check the knowledge base for you. One moment! :books:
----------------------
To adjust the Hot Module Replacement (HMR) settings, you would typically need to modify your project's Vite configuration. However, as of now, Wasp doesn't provide a direct way to customize the Vite configuration for HMR.
In a Github Issue (https://github.com/wasp-lang/wasp/issues/1527), it was mentioned that you can disable the HMR overlay by setting
server.hmr.overlay to false in vite.config.js. However, this is more about adjusting the behavior of the HMR overlay (the interface that shows you errors in your browser), not the HMR itself.
If you're experiencing issues with HMR, it might be more related to the environment (e.g., file system events not being properly propagated in certain environments, like network drives or some virtual file systems) or specific to the project setup.
The Wasp team is aware of the issues with HMR and is actively working on improvements. For now, the recommended workaround is to manually refresh your browser or restart the server after making changes.
If you're still having trouble, I recommend reaching out to the Wasp community on their Discord server (https://discord.com/invite/rzdnErX) or opening an issue on the Wasp Github repository (https://github.com/wasp-lang/wasp/issues) for more specific assistance.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai cant navigate to cd blog
Let me check the knowledge base for you. One moment! :books:
----------------------
If you're having trouble navigating to the
blog directory with the cd blog command, it could be because the blog directory does not exist in your current directory.
Here's how you can check:
1. Open your terminal.
2. Navigate to the directory where your Wasp project is located using the cd command. For example, if your Wasp project is located in a directory named TodoApp in your home directory, you would type cd ~/TodoApp.
3. Once you're in your project directory, you can list the contents of the directory with the ls command. This will show you all the files and directories in your current directory.
If you don't see a blog directory listed, that means it doesn't exist in your current directory, and that's why you're unable to navigate to it with cd blog.
In a Discord support thread (https://discord.com/channels/686873244791210014/1205259772828590110), it was mentioned that the blog directory is part of the open saas template. If you're using this template, the blog directory should be at the top level of your project directory. If it's not there, you might need to create it, or there might be an issue with your project setup.
If you're still having trouble, please provide more information about your setup (e.g., what Wasp template or project you're working with, what operating system you're using, etc.), and I'll do my best to assist you further.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai it says no such file or directory
Let me check the knowledge base for you. One moment! :books:
----------------------
If you're seeing a "No such file or directory" error, it means the system can't find the file or directory you're trying to access. This could be due to a few reasons:
1. The file or directory doesn't exist: Make sure the file or directory you're trying to access actually exists. You can use the
ls command to list the contents of the current directory and check if the file or directory is there.
2. You're in the wrong directory: If the file or directory does exist, make sure you're in the correct directory. You can use the pwd command to print the current directory, and the cd command to change directories.
3. There's a typo in the file or directory name: File and directory names are case-sensitive on most systems, so make sure you're typing the name exactly as it is.
If you're trying to navigate to a directory in your Wasp project, make sure you're in the root directory of your project. For example, if your project is named myProject, you should navigate to it with cd path/to/myProject before trying to access any files or directories within it.
In a Discord support thread (https://discord.com/channels/686873244791210014/1214888257595121684), a user encountered a similar error when trying to run a command that was located in a directory not included in their system's PATH environment variable. If you're trying to run a command, make sure the directory containing the command is included in your PATH.
If you're still having trouble, please provide more information about the specific file or directory you're trying to access, and the exact command you're running that's causing the error.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai how to check if app and blog is therre
Let me check the knowledge base for you. One moment! :books:
----------------------
To check if the
app and blog directories exist in your Wasp project, you can use the ls command in your terminal. Here's how:
1. Open your terminal.
2. Navigate to the root directory of your Wasp project using the cd command. For example, if your project is named myProject, you would type cd path/to/myProject.
3. Once you're in your project's root directory, type ls and press enter. This will list all the files and directories in your current directory.
You should see app and blog listed as directories in your project. If they're not listed, that means they don't exist in your project's root directory.
Remember, the structure of your project can vary depending on the template you used to create your project and any modifications you've made. In a Discord support thread (https://discord.com/channels/686873244791210014/1205259772828590110), it was mentioned that the blog directory is part of the open saas template. If you're not using this template, your project might not include a blog directory.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?main.wasp node_modules package-lock.json package.json public src tsconfig.json vite.config.ts @kapa.ai only this came out
Let me check the knowledge base for you. One moment! :books:
----------------------
Based on the output you've provided, it seems like your Wasp project doesn't have
app and blog directories in the root directory. The directories and files you've listed are typical for a Wasp project:
- main.wasp: This is the main configuration file for your Wasp project.
- node_modules: This directory contains all the Node.js packages that your project depends on.
- package-lock.json and package.json: These files manage the dependencies for your project.
- public: This directory contains static files that are served by your application.
- src: This directory contains the source code for your application.
- tsconfig.json: This file configures the TypeScript compiler for your project.
- vite.config.ts: This file configures Vite, the build tool used by Wasp.
If you're expecting to see app and blog directories but they're not present, it could be that they haven't been created yet, or they might be located in a different directory. If you're following a tutorial or guide, I recommend checking the instructions to see where and when these directories should be created.
If you're trying to create a blog with Wasp, you might find the Wasp tutorial (https://wasp-lang.dev/docs/tutorials/todo-app) helpful. While it doesn't specifically cover creating a blog, it does provide a good introduction to creating applications with Wasp.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai whart shoulf i do to create app and bloh
Let me check the knowledge base for you. One moment! :books:
----------------------
To create new directories in your Wasp project, you can use the
mkdir command in your terminal. Here's how:
1. Open your terminal.
2. Navigate to the root directory of your Wasp project using the cd command. For example, if your project is named myProject, you would type cd path/to/myProject.
3. Once you're in your project's root directory, you can create a new directory with the mkdir command. For example, to create an app directory, you would type mkdir app. To create a blog directory, you would type mkdir blog.
Now, you should have app and blog directories in your project. You can check by typing ls and pressing enter. This will list all the files and directories in your current directory, and you should see app and blog listed.
However, simply creating these directories won't automatically add any functionality to your Wasp project. The structure and functionality of your project will depend on the files and code you add to these directories.
If you're trying to create a blog with Wasp, you might find the Wasp tutorial (https://wasp-lang.dev/docs/tutorials/todo-app) helpful. While it doesn't specifically cover creating a blog, it does provide a good introduction to creating applications with Wasp.
If you're looking to create a new Wasp project entirely, you can use the wasp new command, as described in the Wasp Quick Start guide (https://wasp-lang.dev/docs/quick-start#installation). For example, to create a new project named TodoApp, you would type wasp new TodoApp. This will create a new directory named TodoApp with a basic Wasp project structure.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?@kapa.ai ok ive creaeted app and blog but whats next? these folders a re probably empty right
Let me check the knowledge base for you. One moment! :books:
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?
@kapa.ai ok ive creaeted app and blog but whats next? these folders a re probably empty right
Let me check the knowledge base for you. One moment! :books:
Sorry @priv._1511, I seem to be having a bit of trouble. Don't worry though, I've pinged my support and they will try to fix me up! :technologist:
Perhaps try again in 15mins?
You probably didn't use the
saas template when creating your app with wasp new?@miho yup seems like it, but everything is going perfectly fine right now, thanks man!