can't connect corne to my PC
Both halves are charged, my left half connects and types only when plugged in, "can't connect try again later" happens why trying wireless. And my right half won't connect or type at all. Not sure if i did something wrong in the setup process, or how to troubleshoot now. The right half will get into bootloader and accepts firmware so I at least know its alive.
1 Reply
I'd be happy to help you troubleshoot the issue with your Corne wireless keyboard.
It sounds like you're experiencing two separate issues: the left half not connecting wirelessly and the right half not connecting or typing at all.
Left Half Not Connecting Wirelessly:
1. Ensure that the left half is properly paired with your device. Try resetting the bond on the left half by following the steps in the ZMK documentation.
2. Check that the left half is not bonded to another device. Cycle through the profiles on the left half using the
&bt BT_NXT and &bt BT_PRV keys to clear any existing bonds.
3. Make sure your device supports BLE version 4.2 or higher, as required for ZMK pairing.
Right Half Not Connecting or Typing:
1. Since the right half can enter bootloader mode and accept firmware, it's likely a pairing issue between the two halves. Try resetting both halves at the same time by pressing the reset buttons on each side simultaneously or by shorting the reset pins to ground on each side at the same time.
2. Check the right half's bond status. If it's bonded to the left half, try clearing the bond on the right half using the same steps as above.
3. Ensure that the right half is properly paired with the left half. You can try pairing them again by following the pairing process outlined in the Corne Wireless Getting Started guide.
If you've tried these steps and still can't get the halves to connect or type, please provide more details about your setup process, and I'll do my best to help you troubleshoot the issue.Troubleshooting | ZMK Firmware
The following page provides suggestions for common errors that may occur during firmware compilation or other issues with keyboard usage. If the information provided is insufficient to resolve the issue, feel free to seek out help from the ZMK Discord.