How to fix "If you wish to use IP forwarding, please enable it in your BungeeCord config as well!"
I was setting up Bungeecord and i tried to join the main server and it said "If you wish to use IP forwarding, please enable it in your BungeeCord config as well!" but it is enabled in the bungeecord config
120 Replies
Thanks for asking your question!
Make sure to provide as much helpful information as possible such as logs/what you tried and what your exact issue is
Make sure to mark solved when issue is solved!!!
/close
!close
!solved
!answered
Requested by bmoneyboy#0
You connect to the bungeecord server. Not the back end.
Ik but it put me at the secondary server and when i did /server hub it gave me this error
Are they hosted on the same machine?
No
3 of them are on the same host but 1 of them arent
Is the hub server the one on the other machine?
Did you put a / in the hub ip section of the bungeecord config?
Hub, Survival, and bungee is on one machine and Lifesteal is on the other (im in lifesteal rn)
Okay so I should clarify.
I wanted to know if your bungee and hub were on the same machine
Don't use your public IP for the IP of your hub/survival in your bungee config.
Yes
No its on the ip of my domain im pretty sure idk tho
its not on my ip tho
is ur host on pterodactyl?
then use 172.18.0.1
ye
to join?
and ur host needs to enable it through the firewall usually*
no
in the config
this is my config
yeah ur not supposed to use public ip for that
only for the lifesteal
also proxy should have 25565
I just put that ip
not hub
yeah use 172.18.0.1
Thats hub
For all of them?
except lifesteal
yes
Leave the port or no?
leave port
but proxy should get 25565 port
not hub
having hub on 25565 is pointless
K let me change that in admin settings
ah if ur hosting it urself here
Yep
Minecraft | Pterodactyl
Pterodactyl is an open-source game server management panel built with PHP, React, and Go. Designed with security in mind, Pterodactyl runs all game servers in isolated Docker containers while exposing a beautiful and intuitive UI to end users.
please follow this
Lifesteal is my friends host
K swaped
swapped*
it said
well did u restart every server
Oh no let me do that
after changing port on hub
and proxy
K, every server but lifesteal bc it has a ton of plugins
is restarted
Its giving me the same error
show config
did u apply the firewall rules
show me what pterodactyl says ur hub's ip is
hubs ip is 216.173.119.163:25567
on panel?
Yeah
you didnt follow what i just sent u then
yeah u didnt follow the guide
this is what it shows if correct
(with different port)
Oh
follow the guide
do i put
ufw allow in on pterodactyl0 to 172.18.0.1 port <LOCALHOST_PORT> proto tcp into my console?
or command promptu change <localhost_port> to the differnent ports of your servers
through ssh
k so ill do
in command prompt
(logged into the ssh)
ur missing 25567
Thats the hub
yes..
i put the primary
u need to add that
the port
again wrong
primary is a port u havent added here
^^
so i need to do
what
no
your hubs port
is
2556
25567*
Oh so i need to use the port that is displayed on the address?
yes
but u also
need
to make the allocations 172.18.0.1
as written in the guide
so i need to do
yes
and 25565
u want ur proxy to be 25565
k
In command prompt logged into ssh right?
yes
K i did all of them and it said rule added
now put all backends port allocations to 172.18.0.1
wdym by that?
read
the guide
so do
?
no...
oh wait
thats for CentOS
correct
Minecraft | Pterodactyl
Pterodactyl is an open-source game server management panel built with PHP, React, and Go. Designed with security in mind, Pterodactyl runs all game servers in isolated Docker containers while exposing a beautiful and intuitive UI to end users.
so i need to do localhost/127.0.0.1
to join?
no
-.-
-_-
i now know why i normally charge for this :holy its a pain to explain:
kek
:/
if u read the entire guide over
u can figure it out
my brain doesnt work that way
WAIT SO
do i need to swap the ip in my dns for node.nurlace.xyz (my node)
wha
i even showed u how its supposed to look when done correctly
on hub
ik
im saying do i need to swap this to 127.0.0.1
no
127.0.0.1 isnt gonna be used
AT ALL
-.-
:\
and u dont need to touch dns
at all
okay
my brain hurts
I THINK I FOUND IT
Do i need to be here?
yes
but uh
the ip your typing
is wrong again
-_-
what did i just tell u
172.18.0.1
yes.
Now i need to spawn the ports and stuff over?
remove all servers main port
and give them the new 172.18.0.1
(except proxy)**
and lifesteal
I- i- just changed proxy to 172.18.0.1:25565
Is that fine?
@ProGamingDK
no
that wont work
I added them back
You can probably just use the server ID + port to make a private connection more easily
meh
172.18.0.1
works fine aswell
especially as he is "self" hosting the panel and node
So keep proxy and lifesteal the same and change survival and hub to the new ip and port
yes
k
and use 172.18.0.1 in the bungee config
please use waterfall or better yet velocity tho
It isnt a option
on my admin panel
manually install it
its literally just adding a jar
im guessing u used install script
-.-
For panel yes
Want to join #Voice • General so i can screenshare?
@ProGamingDK
aint getting paid so preferably not
there isnt anything left to do
So just install waterfall to the main container?
the proxy sure
Then restart?
yes
Done
So Hub and Lifesteal work but Survival is still having the same error
@ProGamingDK
Hello?
well show me everything
Survival Console:
Proxy Config:
show error?
i already see the problem
ya didnt add it...
oh i didnt add 25568
I added it
just*
works now!
!close
post closed!
The post/thread has been closed!
Requested by bmoneyboy#0