![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
SuperPinda triggering too late
I am setting up a new vcore 3.1 and until now I've only used bltouch but this time I decided to go with superpinda 
.
First, I had to reverse the polarity of the probe (removed the '!' otherwise it stayed always triggered...).
Then, when homing Z the nozzle rammed into the magnetic bed...
It seems that the probe triggers but it happens too close to the bed. I need to set the probe lower than the bed in order to make it work..
Any ideas?
.First, I had to reverse the polarity of the probe (removed the '!' otherwise it stayed always triggered...).
Then, when homing Z the nozzle rammed into the magnetic bed...
It seems that the probe triggers but it happens too close to the bed. I need to set the probe lower than the bed in order to make it work..
Any ideas?
