![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Gaps between the Layers
the Minion is giving me a bit of a headache at the moment I have gaps between the layers and I just can't find the error
I've tried a number of settings, high and low temperatures, pull back up and down, print slowly and quickly, different fan settings, fan completely from different layer heights, set the flow higher, z-offset checked again, but nothing was successful
tested at PLA and PETG different manufacturers
My setup Orbiter 2.0 with Rapido HF 0.4 nozzle EVA 3.0 with 4028 fan EBB42 Toolboard
The printer is currently running in uncooled driver mode
variable_relative_extrusion: True is also set in SuperSlicer
I've already replaced the nozzle, completely disassembled the Rapido, checked the Bowden between the Orbiter and the Rapido, and I've already disassembled the Orbiter and checked everything
I've tried a number of settings, high and low temperatures, pull back up and down, print slowly and quickly, different fan settings, fan completely from different layer heights, set the flow higher, z-offset checked again, but nothing was successful
tested at PLA and PETG different manufacturers
My setup Orbiter 2.0 with Rapido HF 0.4 nozzle EVA 3.0 with 4028 fan EBB42 Toolboard
The printer is currently running in uncooled driver mode
variable_relative_extrusion: True is also set in SuperSlicer
I've already replaced the nozzle, completely disassembled the Rapido, checked the Bowden between the Orbiter and the Rapido, and I've already disassembled the Orbiter and checked everything
