USB's stop working

My USBs stop working after some time randomly unplugging and replugging doesnt fix it. dmesg: [ 10.799509] usb 1-2: 3:1: cannot get freq at ep 0x86 [ 11.384579] usb 1-2: 3:2: cannot get freq at ep 0x86 [ 11.970581] usb 1-2: 3:3: cannot get freq at ep 0x86 [ 14.960512] usb 1-2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 14.960518] usb 1-2: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 [ 82.462188] usb 1-12.1-port1: cannot reset (err = -32) [ 82.464163] usb 1-12.1-port1: cannot reset (err = -32) [ 82.466162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.468163] usb 1-12.1-port1: cannot reset (err = -32) [ 82.470162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.470163] usb 1-12.1-port1: Cannot enable. Maybe the USB cable is bad? [ 82.472162] usb 1-12.1-port1: cannot disable (err = -32) [ 82.474162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.476166] usb 1-12.1-port1: cannot reset (err = -32) [ 82.478165] usb 1-12.1-port1: cannot reset (err = -32) [ 82.480163] usb 1-12.1-port1: cannot reset (err = -32) [ 82.482162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.482164] usb 1-12.1-port1: Cannot enable. Maybe the USB cable is bad? [ 82.484162] usb 1-12.1-port1: cannot disable (err = -32) [ 82.486162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.488162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.490162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.492163] usb 1-12.1-port1: cannot reset (err = -32) [ 82.494164] usb 1-12.1-port1: cannot reset (err = -32) [ 82.494167] usb 1-12.1-port1: Cannot enable. Maybe the USB cable is bad? [ 82.496160] usb 1-12.1-port1: cannot disable (err = -32) [ 82.498162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.500163] usb 1-12.1-port1: cannot reset (err = -32) [ 82.502162] usb 1-12.1-port1: cannot reset (err = -32) [ 82.504163] usb 1-12.1-port1: cannot reset (err = -32) [ 82.506160] usb 1-12.1-port1: cannot reset (err = -32) [ 82.506161] usb 1-12.1-port1: Cannot enable. Maybe the USB cable is bad? [ 82.508164] usb 1-12.1-port1: cannot disable (err = -32) [ 82.510164] usb 1-12.1-port1: cannot disable (err = -32) [ 82.520178] hub 1-12.1:1.0: hub_ext_port_status failed (err = -32)
No description
7 Replies
HikariKnight
HikariKnight4w ago
unplug your usb hub and keep it plugged out and unpowered (disconnected from power if it receives power from the wall or pc) and leave it like that overnight. that is step 1, always
eatthebuffet
eatthebuffetOP4w ago
I don't have a USB hub
HikariKnight
HikariKnight4w ago
then what hardware
eatthebuffet
eatthebuffetOP4w ago
Its hooked into my motherboard with MPG B650 EDGE WIFI ryzen 9 7900x 3070 32gbs ram
HikariKnight
HikariKnight4w ago
same method when you go to bed then, turn off pc, turn off psu or disconnect the power cable, leave off until you wake up if that does not help, try update bios as it would be a motherboard/firmware issue at that point most likely
eatthebuffet
eatthebuffetOP4w ago
Will do, thanks
HikariKnight
HikariKnight4w ago
the important part is turning off the psu or pulling the power cable when the pc is off to make sure no power enters the system while you sleep

Did you find this page helpful?