Moonlight bandwidth glitch

Hello lovely Bazzite people. Hoping someone can advise. Bazzite working brilliantly on my Legion Go. I like to use Moonlight streaming but every 3 or 4 minutes, I get massive lag for a few seconds, moonlight pops up saying I should lower bandwidth l, but after a few seconds it goes back to normal. Happens over and over again. Doesn’t do this with other hardware or even on the Windows partition of my device. I’m wondering if Bazzite is doing some sort of polling or background activity that causes this regular slowdown? Thanks
3 Replies
Jester Royal
Jester Royal8mo ago
So. What id do is check your dmesg. sudo dmesg -H on the streaming host or reciever. I had this issue on base fedora and dmesg was full of logs that said it was connecting to a different access point with a different Mac address. If you see that on either your legion or your streaming PC you'll need to set your bssid to one of those Mac addresses to stop your device from jumping between antennas on your router.
Antony
AntonyOP8mo ago
Thanks, will give that a go.
Jester Royal
Jester Royal8mo ago
For what its worth, this is what i was seeing in my logs. in sudo dmesg -H
[Apr16 09:45] wlp6s0: disconnect from AP f0:2f:74:55:8e:c4 for new auth to f0:2f:74:55:8e:c8
[ +0.028890] wlp6s0: authenticate with f0:2f:74:55:8e:c8 (local address=64:bc:58:82:ec:04)
[ +0.000683] wlp6s0: send auth to f0:2f:74:55:8e:c8 (try 1/3)
[ +0.027429] wlp6s0: authenticated
[ +0.001513] wlp6s0: associate with f0:2f:74:55:8e:c8 (try 1/3)
[ +0.001312] wlp6s0: RX ReassocResp from f0:2f:74:55:8e:c8 (capab=0x1011 status=0 aid=10)
[ +0.005032] wlp6s0: associated
[ +0.078001] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f0:2f:74:55:8e:c8

[Apr16 09:45] wlp6s0: disconnect from AP f0:2f:74:55:8e:c4 for new auth to f0:2f:74:55:8e:c8
[ +0.028890] wlp6s0: authenticate with f0:2f:74:55:8e:c8 (local address=64:bc:58:82:ec:04)
[ +0.000683] wlp6s0: send auth to f0:2f:74:55:8e:c8 (try 1/3)
[ +0.027429] wlp6s0: authenticated
[ +0.001513] wlp6s0: associate with f0:2f:74:55:8e:c8 (try 1/3)
[ +0.001312] wlp6s0: RX ReassocResp from f0:2f:74:55:8e:c8 (capab=0x1011 status=0 aid=10)
[ +0.005032] wlp6s0: associated
[ +0.078001] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f0:2f:74:55:8e:c8

if you're not seeing that its likely not the same problem but, it seems like pretty normal behavior if you have a fancy ish router with multiple antenna.
Want results from more Discord servers?
Add your server